Hottop Americas Video Education Center

We have created these articles and videos to make your adjustment, repair, and maintenance tasks more understandable.

WARNING: Read all safety warnings and procedures before attempting any of these procedures. We also urge you to read the Troubleshooting Guide on this website before assuming any part of the roaster is faulty. It is possible to damage the machine, and/or void your warranty, and/or cause a dangerous or hazardous situation by following these procedures. Always unplug the machine before beginning any maintenance or repair chores and never work on the machine until it has fully cooled to room temperature. Proceed at your own risk.
CAUTION: Some parts of this machine have sharp edges and other cutting hazards. Take care to protect yourself and the electronic and electrical components of this machine from sharp edges as you work.
CAUTION: There are electronic components in this machine that can be damaged by static electricity. Take static precautions when handling the electronic components or their connections.
 

DISCLAIMER: These video presentations are not intended to be all-inclusive instructional videos nor offer advice on appliance repair. They merely illustrate the process. These videos take a lot for granted such as, but not limited to, safety around electrical devices, proper choice and use of hand tools, techniques to ensure personal safety, protection of property, fire safety, and more. By viewing. listening to, or watching this or any other video on the Hottop USA website you assume all responsibility and release Hottop USA and all its employees and contractors from any and all liability. If you do not accept these terms and/or your local laws prohibit such a release of liability, you may not watch or use the information in these videos.

If you have any questions or concerns about these procedures or instructions,
E-Mail Customer Service. We are here to assist you.

Removing
the
Main Fan

Removing the
Rear Cover

Removing
the
Drum

Removing
the
Top Cover


Removing
the
Main Motor

Removing
the
Fusible
Link

Removing
the
Heating
Element

Removing
the
Eject
Mechanism

Removing
the "B"
Control Panel

Removing
the Old Style
"K-Probe"

Removing
the Right
Side Panel

Removing
the
Roast Chamber

Removing
the
Chaff Tray Switch

Cleaning
A Dirty
Hottop Roaster

Coming Soon!
Removing
the "P"
Control Panel


Roasting Drum Alignment
Part1
Checking Axle Alignment

coming soon


Roasting Drum Alignment
Part 2
Axle Adjustment

coming soon

Understanding
the Heating Element Circuit


Testing the
Heating Element Circuit


Testing
Main Fan
Function