How to Replace the Heating Element

DISCLAIMER: These video presentations are not intended to be all-inclusive instructional videos nor offer advice on appliance repair. They merely illustrate the process. These videos take a lot for granted such as, but not limited to, safety around electrical devices, proper choice and use of hand tools, techniques to ensure personal safety, protection of property, fire safety, and more. By viewing. listening to, or watching this or any other video on the Hottop USA website you assume all responsibility and release Hottop USA and all its employees and contractors from any and all liability. If you do not accept these terms and/or your local laws prohibit such a release of liability, you may not watch or use the information in these videos.

To replace the hetaing element, reverse the above procedure:

Use care not to scrape or damage the insulation on the wires.

Secure wires as necessary with tie wraps.

Test fit the roasting drum and be sure that the heating element does not touch the drum and that it does not tough the chamber's outer wall. If necessary, remove the element and carefully bend the element's mounting bracket for proper placement in the chamber.