How to Remove the Right Side Panel

 DISCLAIMER: These video presentations are not intended to be all-inclusive instructional videos nor offer advice on appliance repair. They merely illustrate the process. These videos take a lot for granted such as, but not limited to, safety around electrical devices, proper choice and use of hand tools, techniques to ensure personal safety, protection of property, fire safety, and more. By viewing. listening to, or watching this or any other video on the Hottop USA website you assume all responsibility and release Hottop USA and all its employees and contractors from any and all liability. If you do not accept these terms and/or your local laws prohibit such a release of liability, you may not watch or use the information in these videos.

To replace the panel:
  • Align the panel with the side of the machine and lock the lower tabs in place.
  • Flex the panel slightly outward while holding the lower edge in place and engage the rear-most tab along the top edge first.
  • Work along the top edge to engage each tab in order, going from back to front.
  • Be sure the bottom edge of the panel is properly aligned and that all uppper tabs are in their respective slots..