Hottop Roaster Model Identification

    When ordering parts such as the control panel, eject mechanism, the temperature sensor, main circuit board, and more, it is important to know exactly which model you have.
    On the control panel and on the bottom of the roaster you will find a model designation such as, "KN-8828B" or similar.

DO NOT USE THESE TO IDENTIFY YOUR ROASTER!


Ignore the model number
on the control panel


Ignore the model number
on the bottom label


HOW TO IDENTIFY YOUR ROASTER

  All Hottop Coffee Roaster model designations can be broken down into four specific positions in the model number. The color codes here coincide with the rest of this page (ie. yellow will always designate "Position 2" on this page):
 
Position 1 Position 2 Position 3 Position 4
Base Model Control Panel Safety Eject Thermocouple

Pick the correct option from the four Position choices below to verify your model:

POSITION 1

For all our coffee roaster models, the basic designation begins with KN-8828.

POSITION 2 - Control Panel


Original model has
no further designation.
KN-8828

This is a
"D" control panel
KN-8828D

This is a "B"
control panel
KN-8828B

This is a "P"
control panel
KN-8828P

This is a "B"
control panel for the
KN-8828B-2K+


POSITION 3 - Emergency Manual Eject Knob

If your machine has this knob located under the
main fan on the back of the machine then it
will have a "-2" in the model designation.
If it does NOT have the knob, then there is no numeral in that location.


POSITION 4 - Temperature Sensor

Remove the front cover from the machine and look into the roast chamber. On the rear wall you will see one of these three thermocouple placements seen here:


Models with this flat "button" temperature sensor
DO NOT have the "K"
designation in the model name

Models with the above K-style thermocouple
DO HAVE the "K"
designation in the model name


Models with the dual K-style thermocouples have the
"K+"
designation in the model name


Put it all together

POSITION 1 POSITION 2 POSITION 3 POSITION 4

All models of Hottop Coffee Roasters
start with the base model number

KN-8828

Control panel adds one
of the following:
no designation or

D or B or P

No knob = no numeral

Models with knob
add "-2"

Button sensor = no letter

Models with one K thermocouple
add "K"

Models with two K thermocouples
add "K+"

EXAMPLE



List of All Possible Factory Models to Date:

KN-8828   KN-8828D   KN-8828B   KN-8828P   KN-8828B-2   KN-8828P-2   KN8828B-2K   KN-8828P-2K   KN-8828B-2K+

NOTE: "Customized" models which have been partially updated by customers could create roasters such as the KN-8828-2, an original model updated with emergency manual eject, or KN-8828B-K, a machine updated to "K" functionality, or dual thermocouples, a KN-8828B-K+, but the emergency manual eject option was not installed. These are not actual factory models. All factory models are listed above this paragraph.


If you have any doubt please feel free to contact us by E-Mail for assistance. We are here to help!

Back to the HOTTOP AMERICAS homepage